GLAZE

• To obtain the characteristic gloss and smoothness of all types of restorations. Applies to chemically and light-cured materials as well as glass ionomers in work such as fillings, inlays / onlays, crowns, bridges and splints for tooth stabilisation.
• It is particularly applicable as the final layer in prosthetic work made of composites for permanent restorations.

We cover composite and glass ionomer work with a thin layer of GLAZE to achieve smoothness and gloss without polishing. We ensure surface levelling by flowing the material into fine irregularities, which allows for perfect smoothness and gloss already after exposure. A suitable resin mixture guarantees high mechanical resistance and protection against abrasion.

We carry out staining of prosthetic work by mixing GLAZE with the COLOURANT or FLOW-COLOR stains, which allows an almost unlimited colour palette. We blend composites with each other, especially flow materials, to achieve brighter, more transparent and natural-looking shades.

We seal the marginal gap, which is caused by polymerisation shrinkage during the modelling of the outer layer. GLAZE penetrates the fissure, seals it and effectively protects the restoration from secondary caries.

Bottle 3 ml

Reconstruction of tooth 24 using FLOW-ART and CREATE composite

Tooth restoration 25 COMCORD & NEXT

Composite filling in tooth 25

What to use GLAZE for?

GLAZE is used to obtain the characteristic tooth shine and smoothness of all types of reconstructions. It is used for chemically and light-cured materials, as well as glass ionomers in works such as: fillings, inlays / onlays, crowns, bridges and splints for tooth stabilization. It is particularly used as the final layer in the case of prosthetic works made of composites for permanent restorations.

Does GLAZE replace polishing?

Thanks to its innovative formula, GLAZE allows you to obtain a smooth surface without the need for time-consuming polishing.

How long to polymerize GLAZE?

Depending on the lamp power:

• Halogen/LED (500-800 mW/cm²) – 40 sec
• LED (>800 mW/cm²) – 30 sec

At what thickness of GLAZE layer will a yellow tint be visible?

At any thickness, if it is insufficiently polymerized. Apply the thinnest possible layer of GLAZE and polymerize properly.

Czym nakładać GLAZE?

GLAZE should be applied with an applicator, it should not be blown out with a blower.

Can GLAZE be used in combination with porcelain?

GLAZE can be applied to porcelain, but remember to properly prepare the surface to which GLAZE is to be applied.

Does GLAZE contain solvents?

No.